Injecting

Injection machines delivered by us are guarantee of a quality and highly effective elaboration of individual plastics types.

Products by supplier:
BOY 2C XS

Boy 2C XS

Mobile injecting unit for two- or more component injecting. This unit can be installed to all horizontal BOY injection molding machines. Injection volume 0,4 cm3 - 76 cm3.

BOY XS

Boy XS

The smallest BOY injection molding machine, closing power 100 kN, horizontal. Maximal distance of boards 250 mm, light distance between guiding columns 160 mm, resp. 205 mm diagonally, injection volume 0,4 cm3 - 8 cm3.

BOY XS V

Boy XS V

The smallest BOY injection molding machine, closing power 100 kN, vertical. Maximal distance of boards 250 mm, light distance between guiding columns 160 mm, resp. 205 mm diagonally, injection volume 0,1 cm3 - 8 cm3.

BOY-25E-A2_frei

Boy 25E, VV, VH, HV

One of the BOY injection molding machines´ best seller. Closing power 250 kN, horizontal and vertical, and even combination with injecting into the dividing plane of form. Maximal distance of boards 400 mm, light distance between guiding columns 254 mm, injection volume 0,4 cm3  - 76 cm3. Available as a vertical (VV), vertically-horizontal (VH) or horizontally-vertical (HV) version.

BOY35E

Boy 35 E, VV, VH, HV

Closing power 350 kN, horizontal and vertical. Maximal distance of boards 500 mm, light distance between guiding columns 280 mm x 254 mm, injection volume 0,6 cm3 - 76 cm3. Available as a vertical (VV), vertically-horizontal (VH) or horizontally-vertical (HV) version.

BOY-50E

Boy 50 E

Closing power 500 kN, horizontal. Maximal distance of boards 650 mm, light distance between guiding columns 360 mm x 335 mm, injection volume 2 cm3 - 76 cm3.

BOY55EVV_A2

Boy 55 E VV

Closing power 550 kN, vertical. Maximal distance of boards 550 mm, light distance between guiding columns 360 mm x 335 mm, injection volume 2 cm3 - 166 cm3.

BOY-60E

Boy 60 E

Closing power 600 kN, horizontal, vertical as BOY 55 E VV. Maximal distance of boards 650 mm, light distance between guiding columns 360 mm x 335 mm, injection volume 2 cm3 - 166 cm3.

BOY-80E

Boy 80 E

Closing power 800 kN, horizontal. Maximal distance of boards 725 mm (optionally 900 mm), light distance between guiding columns 430 mm x 360 mm, injection volume 7 cm3 – 166 cm3.

BOY-100E

Boy 100 E

Closing power 1000 kN, horizontal. Maximal distance of boards 725 mm (optionally 900 mm), light distance between guiding columns 430 mm x 360 mm, injection volume 7 cm3 - 280 cm3.

IMG_gum_horiz

Gum

Horizontal injection molding machine for rubbers with double toggle five points clamping system. Free mobile plate driven on the support base by ball redirection guides. Square tie bars disposition to make the mold’s assembling easier. Square heating plates with chamfering and ORVIN 340° max insulating plates. Injection unit with reciprocating screw. As an alternative, injection unit with screw parted from the piston, or injection unit with FI.FO system. Available from 100 to 400 tons.

IMG_gum_fifo

Gum FI.FO

Horizontal injection molding machine for rubbers with hydroblock clamping and high pressure cylinder. Free mobile plate driven on the support base with ball redirection guides, automatic lubrication nipples. Injection unit with FI-FO system (plasticizing screw in the injection piston provided). Latest generation plumbing with mixed motor on the pump activated by Inverter that guarantees an optimal energy saving, but also a real closed-loop control. Available from 100 to 400 tons.

IMG_gum_vert

Gum Vert

Vertical injection molding machine for rubbers with Hydroblock clamping unit and reciprocating screw injection, or injection unit with screw parted from the piston, or with FI.FO system. Clamping unit, from the bottom to the top, with synchronised upper and bottom frame. Half-mold exit with optical barriers safety device.

IMG_gum_mcv

Gum Vertical MCV

Vertical compression molding machine with piston clamping from the top to the bottom.

IMG_magma

Magma

Horizontal injection molding machine for thermosets with four struts and high pressure cylinder hydroblock clamping. Injection unit with reciprocating screw (operated by oil-dynamic motor). Injection unit and BMC insertion system on demand. Latest generation plumbing with mixed motor on the pump activated by Inverter that guarantees an optimal energy saving, but also a real closed-loop control. Available from 100 to 400 tons.

IMG_nek_ng

Nek NG

Vertical gooseneck injection molding machine for rubbers, with from the high to the bottom pistons clamping. Piston clamping system (n.2) provided with approaching cylinder for a quick clamping and opening. Mobile plate driven on prismatic guides. Vertical injection with reciprocating screw and dedicated profile. Available from 50 to 100 tons.

IMG_nek_np

Nek NP

Vertical gooseneck injection molding machine for thermosets, with from the high to the bottom pistons clamping. Piston clamping system (n.2) provided with approaching cylinder for a quick clamping and opening. Mobile plate driven on prismatic guides. Vertical injection with reciprocating screw and dedicated profile. Available from 50 to 100 tons.

IMG_rem

REM Series

The new FULLY ELECTRIC horizontal injection molding machine for rubbers of the 300 TON. Double toggle five points clamping system with mobile plate that runs on ball redirection guides. Clamping is operated by a 60KN aligned mixed motor. Central ejector is operated by a reserved mixed motor, while the mobile plate’s third plate is activated by two asynchronous motors with reducer. Clamping unit, which runs on appropriate ball redirection guides, works with a reciprocating screw and is operated by a “generous” aligned mixed motor that guarantees a specific injection pressure higher than 2.400 bar. Control unit: a MOOG PLC with touch screen color monitor is provided.

IMG_special_IHSG

Special IHGS

Injection moulding machine for Rubber IHGS600 with vertical clamping system with piston. Horizontal plasticizing unit with dosing crew + Injection Piston 5500 CM3.

IMG_special_K1100

Special K1100

Two storied horizontal injection molding machine for thermosets with hydroblock clamping. Intermediate floor (three floors) fixed and anchored to the support base so as to avoid deflections. Injection unit in parallel to the machine. Injection into the intermediate floor, which is provided with two heating chamber and two independent hydraulic nozzles.